ILM (W) Cable
ILM(W) cable is a heating tape or heating cable for use in industrial / commercial grades, which can be used to prevent frost or to maintain the temperature of pipes and vessels and tanks in the construction industry, heating and refrigeration To be used
The advantage of the ILM (W) thermal cable is that it can be cut at any point to fit the required length. You can use the ILM cable (W) without any precise calculation for the length
The ILM (W) thermal cable is approved for use in non-hazardous, hazardous and corrosive environments in accordance with international standards

ILM(W) thermal cable features
The ILM(W) cable is self-regulating and therefore reliable
ILM does not heat up too much or does not burn even when it is off the ground
The power output of the cable is adjusted to the temperature of the tube
In response to the temperature of the hot surface, the output is automatically adjusted
You can cut the cable as much as you can and do not crash
Suitable for industrial and commercial applications up to 100 degrees Celsius
It has a wide range of terminals, controllers and accessories
Cables do not burn if they are placed together
Suitable for V AC220-277 (VAC110- 120 according to its own specifications)
Installing this Quintherm ILM(W) cable is quick and easy And do not need any special skills or tools. Termination components, fittings and power connections are provided in all appropriate cases

Technical Specifications
Power Output | 40W, 31 W, 25W, 17 W, 10 watts per meter at 10 degrees centigrade |
---|---|
External pod | Polyolefin or Fluoropolymer |
Maximum bright temperature | 100°C (212 ° F) |
Maximum offset temperature | 100°C (212 ° F) |
Minimum installation temperature | 40C- |
Temperatures | T4 |
Voltage | 110-120W,220-277 W |
Maximum wear resistance | <18.2 Ω in km |
Technical Information
Power on | 85°C |
---|---|
Power off | 85°C |
Minimum installation temperature | 40°C - |
Minimum working temperature | 65°C - |
Power supply | 220-277VAC |
Maximum protective cover protection | ≤ 18,2 Ω/km |
Temperatures | T4 = ILM17 and ILM31 T3 = ILMw45 and ILMw60 |
Available models
ILM(w)../Qx | ase heating tape without any braiding or outerjac ket. (only for non-Ex applications) (available upon special request) |
---|---|
ILM(w)..C/Qx | Base heating tape with tinned copper braid providi ng mechanical protection or where Traced equipment does not provide an effective e arth path, e.g. plastic or non-metallic pipework or surfaces. (available upon special request) |
ILM(w)..CT/Qx | Base heating tape with tinned copper braid and the rmoplastic outerjacket for added mechanical and light chemical protection. |
ILM(w)..CF/Qx | Base heating tape with tinned copper braid and flu oropolymer outerjacket for added mechanical and aggressive chemical protection. |
Weight and dimensions
Type | Dimensions Nominal (mm) | Weight kg/100 m | Min. Bending Radius (mm) | Gland Size |
---|---|---|---|---|
ILM.. | 10,5x 3,75 | 5,7 | 25 | M20 |
ILM..C | 11,5x 4,75 | 9,5 | 30 | M20 |
ILM..CT | 12,7x 5,95 | 11,8 | 35 | M20 |
ILM..CF | 12,7x 5,95 | 12,6 | 35 | M20 |
ILMw.. | 13,2x 4,3 | 8,7 | 25 | M20 |
ILMw..C | 14,2x 5,3 | 12,9 | 30 | M20 |
ILMw..CT | 15,4x 6,5 | 15,7 | 40 | M25 |
ILMw..CF | 15,4x 6,5 | 16,6 | 40 | M25 |
Maximum Critical Time (m) and Miniature Circuit Breaker (Amp)
Type | Start Temp. | 230V AC | |||
---|---|---|---|---|---|
10A | 16A | 20A | 25A | ||
LM172 | 10°C | 76 | 120 | 148 | |
0°C | 62 | 98 | 122 | 148 | |
20°C- | 42 | 66 | 82 | 102 | |
40°C- | 28 | 44 | 56 | 68 | |
LM312 | 10°C | 52 | 82 | 104 | 110 |
0°C | 42 | 68 | 84 | 106 | |
20°C- | 28 | 46 | 56 | 70 | |
40°C- | 18 | 30 | 38 | 48 | |
ILMw452 | 10°C | 38 | 62 | 76 | 96 |
0°C | 32 | 50 | 64 | 80 | |
20°C- | 22 | 34 | 42 | 52 | |
40°C- | 14 | 22 | 28 | 34 | |
ILMw602 | 10°C | 35 | 52 | 66 | 32 |
0°C | 28 | 44 | 56 | 70 | |
20°C- | 20 | 32 | 40 | 50 | |
40°C- | 14 | 22 | 28 | 34 |
- Technical Specifications
-
Technical Specifications
Power Output 40W, 31 W, 25W, 17 W, 10 watts per meter at 10 degrees centigrade External pod Polyolefin or Fluoropolymer Maximum bright temperature 100°C (212 ° F) Maximum offset temperature 100°C (212 ° F) Minimum installation temperature 40C- Temperatures T4 Voltage 110-120W,220-277 W Maximum wear resistance <18.2 Ω in km Technical Information
Power on 85°C Power off 85°C Minimum installation temperature 40°C - Minimum working temperature 65°C - Power supply 220-277VAC Maximum protective cover protection ≤ 18,2 Ω/km Temperatures T4 = ILM17 and ILM31
T3 = ILMw45 and ILMw60 - Available models
-
Available models
ILM(w)../Qx ase heating tape without any braiding or outerjac
ket. (only for non-Ex applications)
(available upon special request)ILM(w)..C/Qx Base heating tape with tinned copper braid providi
ng mechanical protection or where
Traced equipment does not provide an effective e
arth path, e.g. plastic or non-metallic
pipework or surfaces.
(available upon special request)ILM(w)..CT/Qx Base heating tape with tinned copper braid and the
rmoplastic outerjacket for added
mechanical and light chemical protection.ILM(w)..CF/Qx Base heating tape with tinned copper braid and flu
oropolymer outerjacket for added
mechanical and aggressive chemical protection. - Weight and dimensions
-
Weight and dimensions
Type Dimensions
Nominal (mm)Weight
kg/100
mMin. Bending
Radius (mm)Gland
SizeILM.. 10,5x 3,75 5,7 25 M20 ILM..C 11,5x 4,75 9,5 30 M20 ILM..CT 12,7x 5,95 11,8 35 M20 ILM..CF 12,7x 5,95 12,6 35 M20 ILMw.. 13,2x 4,3 8,7 25 M20 ILMw..C 14,2x 5,3 12,9 30 M20 ILMw..CT 15,4x 6,5 15,7 40 M25 ILMw..CF 15,4x 6,5 16,6 40 M25 - Flow protection
-
Maximum Critical Time (m) and Miniature Circuit Breaker (Amp)
Type Start
Temp.230V AC 10A 16A 20A 25A LM172
10°C 76 120 148 0°C 62 98 122 148 20°C- 42 66 82 102 40°C- 28 44 56 68 LM312 10°C 52 82 104 110 0°C 42 68 84 106 20°C- 28 46 56 70 40°C- 18 30 38 48 ILMw452 10°C 38 62 76 96 0°C 32 50 64 80 20°C- 22 34 42 52 40°C- 14 22 28 34 ILMw602 10°C 35 52 66 32 0°C 28 44 56 70 20°C- 20 32 40 50 40°C- 14 22 28 34 For use with Type “C” CB in accordance with EN608982:2006 - Thermal curve
- Product components